• <cite id="oppvj"></cite>
    <dd id="oppvj"><nav id="oppvj"><delect id="oppvj"></delect></nav></dd>
    <cite id="oppvj"><del id="oppvj"></del></cite>
  • <dd id="oppvj"></dd>
    <dd id="oppvj"><samp id="oppvj"><delect id="oppvj"></delect></samp></dd>
  • <meter id="oppvj"></meter>
    1. 東莞市中啟塑膠歡迎您!
      您現在的位置: 網站首頁 > 產品中心 > TPU聚氨脂 > 常用TPU塑料 > 為您提供TPU|德國巴斯夫|1175A10W報價!免費提供TPU|德國巴斯夫|1175A10W物性表、SGS、MSDS、UL證書等資料下載

      TPU|德國巴斯夫|1175A10W

      用 途:
      汽車配件,醫療器械,工業配件,電線電纜,鞋材薄膜,涂料膠粘劑
      價 格:
      標注的價格為:發布時期的那一段時間的價格,實時價格請電話咨詢
      備 注:
      阻燃增韌級,屬特殊品級,主要用于電線電攬等材料
      優惠價:¥55 關注熱度:
      熱線電話:138-2726-8341(官R)??158-9996-3239(曾R)
      • BASF Elastollan® 1175A10W Wire & Cable Grade Polyurethane Elastomer 物性表
        物理性能 額定值 (公制) 額定值 (英制) 測試方法
        密度 1.14 g/cc
        @Thickness 2.00 mm
        0.0412 lb/in³
        @Thickness 0.0787 in
        molded plaque, cured 20 hr at 100°C; ASTM D792
        機械性能 額定值 (公制) 額定值 (英制) 測試方法
        肖氏硬度 (邵氏 A) 75
        @Thickness 2.00 mm
        75
        @Thickness 0.0787 in
        molded plaque, cured 20 hr at 100°C; ASTM D2240
        極限抗拉強度 41.0 MPa
        @Thickness 2.00 mm
        5950 psi
        @Thickness 0.0787 in
        molded plaque, cured 20 hr at 100°C; ASTM D412
        抗張強度(屈服) 4.80 MPa
        @Strain 100 %
        696 psi
        @Strain 100 %
        ASTM D-412
          11.0 MPa
        @Strain 300 %
        1600 psi
        @Strain 300 %
        0.76 mm (0.030 in) extruded sheet; ASTM D-412
        伸長率 (斷裂) 685 % 685 % on 0.030 in extruded sheet; ASTM D-412
        彎曲模量 0.0250 GPa
        @Thickness 2.00 mm
        3.63 ksi
        @Thickness 0.0787 in
        molded plaque, cured 20 hr at 100°C; ASTM D790
        撕裂強度 27.0 kN/m
        @Thickness 0.760 mm
        154 pli
        @Thickness 0.0299 in
        Split tear strength; extruded sheet; ASTM D-1938
        Graves Tear Strength 57.0 kN/m
        @Thickness 0.762 mm
        325 pli
        @Thickness 0.0300 in
        extruded sheet; ASTM D624
        泰伯磨損,毫克/1000次 20
        @Thickness 2.00 mm
        20
        @Thickness 0.0787 in
        H-18 wheel; ASTM D-1044; molded plaque, cured 20 hr at 100°C.
        永久壓縮 25 % 25 % 22 hr at 23°C per ASTM D-395; 2.0 mm (0.080 in) molded plaque, cured 20 hr at 100°C.
          45 %
        @Temperature 70.0 °C
        45 %
        @Temperature 158 °F
        22 hr @ 70°C; ASTM D-395; 0.080 in molded plaque after curing 20 hrs at 100°C.
        Tensile Set 32 % 32 % at 200% elongation per ASTM D-412 is on 0.030 in extruded sheet.
        熱性能 額定值 (公制) 額定值 (英制) 測試方法
        維卡軟化溫度 80.0 °C
        @Thickness 2.00 mm
        176 °F
        @Thickness 0.0787 in
        molded plaque, cured 20 hr at 100°C.; ASTM D1525
        玻璃化轉變溫度,Tg -47.0 °C -52.6 °F Pellet sample
        可燃性(UL94) V-2
        @Thickness 1.59 mm
        V-2
        @Thickness 0.0626 in
        Color: NC
          V-2
        @Thickness 3.14 mm
        V-2
        @Thickness 0.124 in
        Color: NC
          V-0
        @Thickness 0.900 mm
        V-0
        @Thickness 0.0354 in
        Color: NC

      星空影院在线手机版在线观看_强迫类av无码_无收费看完整污网站主页_我强行把老师的处破了_无码中文乱码一区_我脱了内裤坐在我男朋友身上