• <cite id="oppvj"></cite>
    <dd id="oppvj"><nav id="oppvj"><delect id="oppvj"></delect></nav></dd>
    <cite id="oppvj"><del id="oppvj"></del></cite>
  • <dd id="oppvj"></dd>
    <dd id="oppvj"><samp id="oppvj"><delect id="oppvj"></delect></samp></dd>
  • <meter id="oppvj"></meter>
    1. 東莞市中啟塑膠歡迎您!
      您現在的位置: 網站首頁 > 產品中心 > TPU聚氨脂 > 常用TPU塑料 > 為您提供TPU|德國巴斯夫|1185A10W報價!免費提供TPU|德國巴斯夫|1185A10W物性表、SGS、MSDS、UL證書等資料下載

      TPU|德國巴斯夫|1185A10W

      用 途:
      汽車配件,醫療器械,工業配件,電線電纜,鞋材薄膜,涂料膠粘劑
      價 格:
      標注的價格為:發布時期的那一段時間的價格,實時價格請電話咨詢
      備 注:
      TPU的耐油性能優于丁腈橡膠,具有極好的耐油壽命。
      優惠價:¥54 關注熱度:
      熱線電話:138-2726-8341(官R)??158-9996-3239(曾R)
      • BASF Elastollan® 1185A10W Wire & Cable Grade Polyurethane Elastomer 物性表
        物理性能 額定值 (公制) 額定值 (英制) 測試方法
        密度 1.16 g/cc
        @Thickness 2.00 mm
        0.0419 lb/in³
        @Thickness 0.0787 in
        molded plaque, cured 20 hr at 100°C; ASTM D792
        機械性能 額定值 (公制) 額定值 (英制) 測試方法
        肖氏硬度 (邵氏 A) 83
        @Thickness 2.00 mm
        83
        @Thickness 0.0787 in
        molded plaque, cured 20 hr at 100°C; ASTM D2240
        極限抗拉強度 38.0 MPa
        @Thickness 2.00 mm
        5510 psi
        @Thickness 0.0787 in
        molded plaque, cured 20 hr at 100°C; ASTM D412
        抗張強度(屈服) 5.90 MPa
        @Strain 100 %
        856 psi
        @Strain 100 %
        ASTM D-412
          13.0 MPa
        @Strain 300 %, Thickness 0.760 mm
        1890 psi
        @Strain 300 %, Thickness 0.0299 in
        extruded sheet; ASTM D412
        伸長率 (斷裂) 595 % 595 % on 0.030 in extruded sheet; ASTM D-412
        彎曲模量 0.0430 GPa
        @Thickness 2.00 mm
        6.24 ksi
        @Thickness 0.0787 in
        molded plaque, cured 20 hr at 100°C; ASTM D790
        撕裂強度 66.0 kN/m
        @Thickness 0.760 mm
        377 pli
        @Thickness 0.0299 in
        Split tear strength; extruded sheet; ASTM D1938
        Graves Tear Strength 88.0 kN/m
        @Thickness 0.760 mm
        502 pli
        @Thickness 0.0299 in
        on extruded sheet; ASTM D624
        泰伯磨損,毫克/1000次 35
        @Thickness 2.00 mm
        35
        @Thickness 0.0787 in
        H-18 wheel; molded plaque, cured 20 hr at 100°C.; ASTM D1044
        永久壓縮 45 %
        @Temperature 70.0 °C
        45 %
        @Temperature 158 °F
        22 hr @ 70°C; ASTM D-395; 0.080 in molded plaque after curing 20 hrs at 100°C.
          25 %
        @Thickness 2.00 mm
        25 %
        @Thickness 0.0787 in
        22 hr at 23°C; molded plaque, cured 20 hr at 100°C.; ASTM D395
        Tensile Set 32 % 32 % at 200% elongation per ASTM D-412 is on 0.030 in extruded sheet.
        熱性能 額定值 (公制) 額定值 (英制) 測試方法
        維卡軟化溫度 100 °C
        @Thickness 2.00 mm
        212 °F
        @Thickness 0.0787 in
        molded plaque, cured 20 hr at 100°C; ASTM D1525
        玻璃化轉變溫度,Tg -43.0 °C -45.4 °F Pellet sample
        可燃性(UL94) V-2
        @Thickness 0.830 mm
        V-2
        @Thickness 0.0327 in
        Color: NC. V-2
          V-2
        @Thickness 1.50 mm
        V-2
        @Thickness 0.0591 in
        Color: NC. V-2
          V-2
        @Thickness 3.00 mm
        V-2
        @Thickness 0.118 in
        Color: NC. V-2

      星空影院在线手机版在线观看_强迫类av无码_无收费看完整污网站主页_我强行把老师的处破了_无码中文乱码一区_我脱了内裤坐在我男朋友身上